Cable assembly at Centwerk means working with a specialist with nearly thirty years of experience in custom cable manufacturing. From a single cable with connector to an extensive wiring harness with multiple branches and heat shrink sleeves: we process your specifications into an installation-ready end product. Receive a cable assembly quote within 24 hours.
What is cable assembly?
Cable assembly is the process of transforming individual cables, connectors and accessories into a ready-to-install electrical connection product. The end product can be a single cable with a termination at one or both ends. More often, it involves a wiring harness: a bundle of multiple cables with branches, heat shrink sleeves and protective coverings. The layout follows the exact configuration of your machine or installation, ensuring the cabling fits directly into place during assembly.
Operations such as stripping, crimping, tinning and fitting connectors are all part of the production process. The starting point is always your own drawing, bill of materials or technical diagram. If that documentation is not yet available, our specialists will work with you to arrive at a clear specification. The end result is a fully tested cable assembly, packaged and ready for immediate installation.
Which industries is cable assembly suitable for?
Cable assembly is suitable for virtually every industry where electrical connections form part of a machine, device or installation. Machine builders have wiring harnesses manufactured so they receive ready-to-install cabling for their machines. Electronics manufacturers outsource their cable processing to take the load off their own production lines. Installation companies relieve their technicians by having cable sets manufactured externally, eliminating time-consuming stripping work on site.
We carry out cable assembly for companies of all sizes, both in the Netherlands and abroad. Small runs for prototyping and larger runs for ongoing production: we handle both, with no minimum order quantity. The nature of the order determines the production process, but the quality requirements remain consistent throughout. Contact us to discuss what we can do for your cable assembly.
How does the cable assembly process work at Centwerk?
A cable assembly project follows a fixed workflow at Centwerk, as with our other assembly services. From the first enquiry to final delivery, you have one dedicated contact person overseeing your project. The process consists of three phases.
Enquiry and quotation
You send us your drawing, bill of materials or technical diagram. If your specifications are not yet fully detailed, our specialists will work with you to develop a clear description. Within 24 hours you will receive a tailored cable assembly quote, including an indication of the price and expected lead time. This gives you a clear picture upfront of what to expect from your cable assembly production.
Custom production
Once you approve the quote, we start production of your cable assembly. We strip, crimp and manufacture your cables exactly as your drawing or bill of materials specifies. Single cables and complex wiring harnesses with multiple branches: we produce both. Small prototype runs and larger runs for ongoing supply are both possible, with no minimum order quantity. We keep you informed on progress and notify you promptly of any changes to the planning.
Quality control and delivery
Every manufactured product goes through quality control before leaving our workshop. We hold ISO 9001 certification for quality management. Every production step is documented and repeatable, in line with ISO requirements. The testing method is tailored to your product and requirements, ranging from visual inspection to continuity testing. After inspection, your cable assembly is packaged and ready for immediate installation.
Why do companies choose Centwerk for cable assembly?
Cable assembly at Centwerk means working with a partner who knows the trade inside out. We started out in cable processing in the nineties and have since built up nearly thirty years of hands-on experience. With us, you know upfront what your order will cost, when it will be delivered and who to contact with any questions.
We work with competitive rates, distinguishing between straightforward and specialist work. This means you only pay for the level of expertise your order actually requires. We also hold ISO 9001 certification for quality management and ISO 14001 for environmental management. Where needed, we can handle the procurement of cable materials and manage your inventory, allowing you to coordinate your entire cable production with a single partner.
What you can expect from us:
- Quote within 24 hours of your enquiry
- A dedicated contact person for your project, from enquiry to delivery
- Custom work in small and large runs, with no minimum order
- Competitive rates distinguishing between straightforward and specialist work
- ISO 9001 and ISO 14001 certification
- Cable procurement as a standalone service alongside production
Centwerk also handles electronics assembly, machine assembly, mechanical assembly and assembly work. View the full assembly offering for more information.
Ready to outsource your cable assembly?
Outsourcing your cable assembly starts with a no-obligation enquiry. We assess your specifications and send you a tailored quote within 24 hours. If you have questions before submitting an enquiry, our specialists are happy to help. Get in touch and take the first step towards your cable assembly.
Frequently asked questions about cable assembly
What is the difference between cable assembly and cable processing?
The difference between cable assembly and cable processing lies in scope. Cable processing focuses on the preparation of individual cables: stripping, crimping, tinning and fitting wire end ferrules. Cable assembly covers the full process of transforming cables, connectors and accessories into a finished product with a specific layout and function. A single finished cable and a wiring harness with multiple branches are both forms of cable assembly. Cable processing is therefore one part of the broader cable assembly process.
Can I have a one-off prototype manufactured?
A one-off prototype is possible at Centwerk. We have no minimum order quantity; you can submit an enquiry for a single unit or a small test run. We manufacture the prototype based on your drawing or description and deliver it with the associated quality control. This allows you to evaluate and approve the design before moving to a larger production run.
How detailed do my drawings need to be to submit an enquiry?
Your drawings do not need to be fully worked out before submitting an enquiry. You can send what you have: a technical diagram, a bill of materials or a general description of your product. Our specialists will assess your enquiry and follow up to request any missing details. We will also advise on the choice of cable type, connector or wiring harness layout before preparing a quote.
What other services does Centwerk offer besides cable assembly?
In addition to cable assembly, Centwerk also provides panel building, CNC turning, CNC milling, co-packing and fulfilment. You can outsource a single cable assembly or hand over a broader scope, from cable procurement and production through to packaging and delivery to your customer. This way you work with one partner across multiple production steps, without having to manage several different suppliers. You receive a quote within 24 hours for every service.
Can Centwerk advise on the design of a cable assembly?
Contributing to the design is a standard part of the process at Centwerk. We assess your enquiry for manufacturability and advise on the wiring harness layout, connector selection and cable type. You decide which suggestions to adopt; your own design always remains leading. If you would like to discuss a cable concept at an early stage, feel free to contact us for an exploratory conversation.
